Skip to main content

First post ... woohoo!

Coming soon, all these and more signals controlled by one single Arduino pin!

Popular posts from this blog

Pi Pico, we smell competition in the land of the RRRduino! 

Pi Pico on an N-scale gondola Pi Pico, we smell competition in the land of the ‘duino!  Our very favorite low cost microcontroller system is seeing some fresh competition.  Everyone by now has heard about the Raspberry Pi, some fruity company in the United Kingdom, making single board computers!  They run Raspbian (or other flavors of Linux and are capable of some Windows versions) for as little money as $10 for the Pi Zero W.  The more popular Model 4, with 2 GB of RAM, retails for about $29.  Add a $5  micro SD card and you have a real computer with which you can surf the internet, write code and even program Arduinos.  It also runs our other favorite, JMRI.  Of course, plug it into a small or big screen television with an HDMI cable and you can even stream Netflix.  If you want a really cool computer built into a keyboard, also check out the brand new, Raspberry Pi 400 , you might just think you own a ZX Spectrum again. These are all “computers” with processors and now the Raspberry

Not too important IR remote info...

Onn 4-Device Universal Remote manual... setting codes... Up Arrow TV Mode: Decoded NEC(1) : Value:20DF00FF Adrs:0 (32 bits) Raw samples(68): Gap:5484   Head: m8800  s4500  0:m550 s600     1:m500 s600            2:m500 s1700     3:m550 s550           4:m550 s600     5:m500 s600            6:m500 s600      7:m550 s550           8:m500 s1700    9:m550 s1700          10:m500 s600     11:m550 s1650          12:m550 s1700    13:m550 s1650         14:m550 s1650    15:m550 s1700          16:m500 s600     17:m500 s600          18:m500 s600     19:m550 s550          20:m550 s600     21:m500 s600          22:m500 s600     23:m500 s600          24:m550 s1650    25:m550 s1700         26:m550 s1650    27:m550 s1650          28:m550 s1700    29:m550 s1650         30:m550 s1650    31:m550 s1700          32:m550 Extent=67100 Mark  min:500     max:550 Space min:550     max:1700 CBL Mode: Decoded RC6(4) : Value:2758 Adrs:0 (20 bits)  Raw samples(36): Gap:43150   Head: m2600  s900  0:m350 s900 

The One Pin Signal System, using an Arduino

The One (RRRduino) Pin Signal System! Part I NeoPixels: Yes, you read that right, you can control a whole signal system with up to 200 lights by using a single Arduino pin. And this was not my idea, all the credit and the patent goes to my friend Tom, but since I already had something using the same technology up and running using only a Nano, I do not feel too bad telling you about it. Short video first! There is a tiny 8 pin chip out there called a WS2811 which is a three channel LED driver, and you might find them on the interweb as NeoPixel LED Driver Chips. They need power and ground, typically 5 Vdc, and data to be put in the three registers inside the chip, one for each LEDs it can control. So, in most cases out there today, the LEDs connected are Red, Green and Blue (RGB for short) and by setting the three registers each with an 8 bit value (which in English means a value from 0 to 255, since 2 8 = 256, but since 0 is an acceptable value too, the maximum is 2 8 - 1